Miele is a German appliance maker whose connected appliances run under the Miele@home label. The Miele app monitors and controls washing machines, tumble dryers, dishwashers, ovens, hobs, hoods, coffee machines, fridges and robot vacuums.
Visit Miele website Back to all brands
Works with full table
Miele appliances connect through Miele's cloud. Newer models join the home router by Wi-Fi, and Zigbee-based appliances need the Miele@home Gateway XGW3000. Every integration we found, apart from one openHAB binding that talks to the gateway, goes through Miele's cloud and its 3rd Party API.
That suits remote control and status alerts, and gives Home Assistant, Homey and openHAB users a documented route to appliance data. It is weaker if you want appliances in automations that keep working without Miele's servers, because none of the pages we read describe a local-only mode.
Source: Homey Miele app listing
The current app. Remote control and status for washing machines, dishwashers, ovens and more, cycle-finished notifications, a consumption dashboard, a washing assistant, recipes and CookAssist, fault diagnostics and RemoteUpdate. It has a demonstration mode that works without an appliance. The iPhone listing requires iOS 15.0 or later and is published by Miele & Cie. KG. Miele's Miele@home page says the app is on Google Play, but no Play link was found. Other Miele apps, such as for professional appliances, were not checked.
Official supported by the brand Community built by someone else Not found searched, nothing found Unconfirmed sources conflict or could not be opened
| Platform | Status | What it means | Sources |
|---|---|---|---|
| Connection | |||
| Wi-Fi | Yes | Wi-Fi Conn@ct appliances connect directly through a Wi-Fi router to the Miele cloud, as the 3rd Party API page describes. Miele's Miele@home page says the appliance and the phone must be on the same Wi-Fi network for the app. The pages we read give no frequency band. | Miele 3rd Party API: get started Miele@home page (miele.de) |
| Zigbee | Yes | Zigbee appliances need the Miele@home Gateway XGW3000 to reach the Miele cloud and the 3rd Party API. Home Assistant's page repeats this. The pages we read do not say which appliance generations are Zigbee. | Miele 3rd Party API: get started Home Assistant Miele |
| Bluetooth, Thread, Z-Wave | Not mentioned | None of these are mentioned on the Miele@home page, the App Store listing or the 3rd Party API page. | Miele@home page (miele.de) Miele app (App Store) |
| Matter | Unconfirmed | No Matter mention on the Miele pages we read, and no Miele announcement turned up. We did not run a dedicated search, so this is unconfirmed. | Searched, no source |
| Voice assistants and ecosystems | |||
| Google Home | Official | Miele's Miele@home page says its appliances work with Google Assistant to start programs, change settings and check status. Some ovens with a camera can show cooking progress on a Google Nest Hub. Voice control depends on Google's services and features vary by country. We found no separate setup page. | Miele@home page (miele.de) Google Home compatible devices |
| Amazon Alexa | Official | Miele's Miele@home page says appliances work with Alexa to start programs, change settings and check status, and some camera ovens can show progress on an Echo Show. It also mentions a Miele skill for stain-removal tips and laundry-finished notices. Features vary by country. | Miele@home page (miele.de) Alexa Skills store |
| Apple Home | Unconfirmed | Apple Home and HomeKit are not mentioned on the Miele pages or the App Store listing we read, and we found no Miele page on it. We could not confirm any route. | Searched, no source |
| Samsung SmartThings | Unconfirmed | We did not find a Miele or SmartThings page for this. We could not confirm either way. | Searched, no source |
| Open platforms and developer access | |||
| Home Assistant | Yes | A built-in Miele integration is maintained by the Home Assistant project, not by Miele. It uses the Miele 3rd Party API with Cloud Push updates through server-sent events, and covers Miele appliances linked to a Miele account in the Miele app. Wi-Fi Conn@ct appliances connect directly and Zigbee appliances need the XGW3000. Only one integration entry is supported, professional series are generally unsupported, and the API does not cover every function of the app. | Home Assistant Miele |
| Homey | Official | A Homey app listed under Miele & Cie. KG as publisher covers about 20 device types, including washers, dryers, dishwashers, ovens, hobs, hoods, coffee machines, fridges and robot vacuums. The listing shows Homey Cloud, Homey Pro, Homey Pro mini and Self-Hosted Server, but also marks Homey Bridge as required for every category, and we could not resolve which applies. It uses cloud and needs Homey software 12.0.1 or later. Its support contact is on a third-party domain, so who built it is unconfirmed. A separate older community app, Miele@Home by Tim Arendsen, was last updated about four years ago. | Homey Miele app Homey Miele@Home (community) |
| openHAB | Yes | Two bindings are in openHAB's add-on list, both maintained by the openHAB project, not by Miele. The Miele Cloud binding uses Miele's cloud and needs a Miele account plus client ID and secret from the Miele developer portal. The separate Miele@home binding requires the XGW3000 gateway and covers coffee machines, dishwashers, fridges, hobs, hoods, ovens, dryers and washing machines. | openHAB Miele Cloud binding openHAB Miele@home binding |
| Node-RED | Unconfirmed | No dedicated Node-RED node for Miele turned up in the pages we checked. We could not confirm either way. | Searched, no source |
| Hubitat | Unconfirmed | We did not find a Hubitat driver for Miele in the pages we checked. We could not confirm either way. | Searched, no source |
| Domoticz | Unconfirmed | We did not find a Domoticz plugin for Miele in the pages we checked. We could not confirm either way. | Searched, no source |
| Control4 | Unconfirmed | We did not find a Control4 driver for Miele in the pages we checked. We could not confirm either way. | Searched, no source |
| IFTTT | Unconfirmed | We did not find a Miele service on IFTTT in the pages we checked. We could not confirm either way. | Searched, no source |
| Miele 3rd Party API | Official | Miele runs a developer portal for a cloud-based REST API, authenticated with OAuth 2.0 and tied to a user's Miele account. Developers generate client credentials in the portal and must accept the API's terms of use. Commercial use requires contacting Miele first. All devices shown in the Miele app are reachable, but with a subset of the app's features. The portal works only on desktop and tablet, and the pages we read do not state a price, rate limits or any local access. | Miele 3rd Party API: get started Miele developer FAQ |
Checked 11 November 2026 against the brand's own pages, app store listings and each project's own page. “Not found” means we searched and found nothing, not that it is impossible. Compatibility changes often. Spot an error? Tell us and we will fix it.
Unconfirmed. No Matter mention on the Miele pages we read, and no Miele announcement turned up. We did not run a dedicated search, so this is unconfirmed.
Yes, officially. Miele's Miele@home page says appliances work with Alexa to start programs, change settings and check status, and some camera ovens can show progress on an Echo Show. It also mentions a Miele skill for stain-removal tips and laundry-finished notices. Features vary by country.
Yes, officially. Miele's Miele@home page says its appliances work with Google Assistant to start programs, change settings and check status. Some ovens with a camera can show cooking progress on a Google Nest Hub. Voice control depends on Google's services and features vary by country. We found no separate setup page.
Unconfirmed. Apple Home and HomeKit are not mentioned on the Miele pages or the App Store listing we read, and we found no Miele page on it. We could not confirm any route.
Yes. A built-in Miele integration is maintained by the Home Assistant project, not by Miele. It uses the Miele 3rd Party API with Cloud Push updates through server-sent events, and covers Miele appliances linked to a Miele account in the Miele app. Wi-Fi Conn@ct appliances connect directly and Zigbee appliances need the XGW3000. Only one integration entry is supported, professional series are generally unsupported, and the API does not cover every function of the app.
Unconfirmed. We did not find a Miele or SmartThings page for this. We could not confirm either way.
Yes, officially. A Homey app listed under Miele & Cie. KG as publisher covers about 20 device types, including washers, dryers, dishwashers, ovens, hobs, hoods, coffee machines, fridges and robot vacuums. The listing shows Homey Cloud, Homey Pro, Homey Pro mini and Self-Hosted Server, but also marks Homey Bridge as required for every category, and we could not resolve which applies. It uses cloud and needs Homey software 12.0.1 or later. Its support contact is on a third-party domain, so who built it is unconfirmed. A separate older community app, Miele@Home by Tim Arendsen, was last updated about four years ago.
Unconfirmed. We did not find a Hubitat driver for Miele in the pages we checked. We could not confirm either way.
Answers come from the sourced table above. See how Miele compares with all brands on the smart home brand statistics page.
Other brands in Smart Fridges & Freezers, Smart Ovens & Cooktops, Washers & Dryers.