NexBlue makes home and business EV chargers (Edge 2, Edge Max, Delta, Delta Max) and Zen load balancers, sold in Europe with offices listed in Sweden, the UK, the Netherlands, Norway and Denmark. The chargers are controlled with the myNexBlue app and a web portal, with installers using a separate Partner app.
Visit NexBlue website Back to all brands
Works with full table
NexBlue chargers connect over Wi-Fi (2.4 GHz), Ethernet or a built-in 4G eSIM, and also offer Bluetooth for local control. For energy systems the Edge 2 page lists local OCPP, Modbus TCP is documented separately, and a cloud integration exists for Home Assistant and Homey. Voice assistants and Matter were not found.
That suits owners who want solar-aware charging, load balancing across several chargers, or a connection to an OCPP back end or an energy manager. It is weaker for people who expect Alexa, Google Home or Apple Home control, and the Homey app was reported by users as only partly working.
Source: NexBlue Edge 2 product page
The user app. Remote control and monitoring, scheduled and smart charging, load balancing, RFID card management and shared admin access. NexBlue's page also describes local Bluetooth control that works without internet. Published by NEXBLUE.
The installer app, used to commission chargers and set up options such as a custom OCPP platform. We could not confirm the store links, so none are given here.
Official supported by the brand Community built by someone else Not found searched, nothing found Unconfirmed sources conflict or could not be opened
| Platform | Status | What it means | Sources |
|---|---|---|---|
| Connection | |||
| Wi-Fi | Yes | The Edge 2 page lists 2.4 GHz 802.11 b/g/n Wi-Fi. | NexBlue Edge 2 |
| Ethernet and 4G | Yes | The Edge 2 page lists RJ45 Ethernet (10/100 Mbit/s) and a built-in eSIM with 4G LTE Cat 1. | NexBlue Edge 2 |
| Bluetooth | Yes | The Edge 2 page lists BLE 4.2. NexBlue's app page says Bluetooth allows control without internet and that schedules keep running offline. | NexBlue Edge 2 NexBlue user app |
| Proprietary radio | Yes | The Edge 2 page lists a local Nexus RF radio. It does not explain what the radio is used for, so we could not confirm its role. | NexBlue Edge 2 |
| Zigbee, Z-Wave, Thread | Not mentioned | None of these are mentioned on the NexBlue pages we opened. | NexBlue Edge 2 |
| Matter | Not found | No NexBlue Matter announcement or support found when we searched. | Searched, no source |
| OCPP | Official | The Edge 2 page lists local OCPP 1.6-J and 2.0.1, while the NexBlue homepage describes the chargers as OCPP 2.0.1 ready, so the exact version support should be checked per model. NexBlue's guide says to commission the charger, then choose a customized OCPP platform in the app and enter a ws or wss server address. It needs firmware 1.1.2 or later. | NexBlue Edge 2 Install OCPP guide NexBlue homepage |
| Modbus TCP | Official | NexBlue documents Modbus TCP on port 502 over Ethernet or Wi-Fi for Edge 2, Edge Max, Point 2 (UK), Delta and Delta Max, with minimum firmware stated per model. It is switched on in the app, covers monitoring and control of current, start and stop and phase mode, and requires a periodic write as a heartbeat. | NexBlue Modbus documentation |
| Voice assistants and ecosystems | |||
| Google Home | Not found | No NexBlue Google Home support found on the pages we opened or when we searched. | Searched, no source |
| Amazon Alexa | Not found | No NexBlue Alexa support found on the pages we opened or when we searched. | Searched, no source |
| Apple Home | Not found | No NexBlue Apple Home or HomeKit support found when we searched. | Searched, no source |
| Samsung SmartThings | Not found | No integration found when we searched. | Searched, no source |
| Intelligent Octopus Go | Official | NexBlue says its chargers integrate with the Intelligent Octopus Go tariff in the UK and that customers configure the charger to match the tariff. The article names no models or requirements. | NexBlue and Octopus Energy |
| Open platforms and developer access | |||
| Home Assistant | Yes | Home Assistant has a built-in NexBlue integration, added in release 2026.9. It reads the NexBlue cloud once a minute and provides sensors for state, power, energy, current and voltage, plus a start and stop switch. Local control is not part of it, and Modbus TCP is configured separately in YAML. The listed owner is @nexblue-maintainer, and we could not confirm whether that is NexBlue staff. | Home Assistant NexBlue integration |
| Homey | Official | Homey lists an official myNexBlue app. It starts and stops charging, reads power and sessions, sets the current limit and works in Flows. The listing does not say which Homey models or Homey Bridge it needs. A Homey community thread reports it was built by a development agency, cannot control the Zen load balancer, and caps the current limit at 16 A. | Works with Homey: NexBlue Homey community thread |
| openHAB | Not found | No NexBlue binding found when we searched. | Searched, no source |
| Node-RED | Not found | No dedicated node found. Modbus TCP is documented by NexBlue, but we did not find a Node-RED example. | Searched, no source |
| Hubitat | Not found | No driver found when we searched. | Searched, no source |
| Domoticz | Not found | No plugin found when we searched. | Searched, no source |
| Control4 | Not found | No integration found when we searched. | Searched, no source |
| IFTTT | Not found | No NexBlue service found when we searched. | Searched, no source |
| Philips Hue | Not found | No integration found. | Searched, no source |
| NexBlue developer API | Official | NexBlue's product and app pages link to OpenAPI (Swagger) documentation and an Integration Guides page. We could not open the API documentation, so its scope and authentication are unconfirmed. | NexBlue Edge 2 NexBlue user app |
Checked 11 November 2026 against the brand's own pages, app store listings and each project's own page. “Not found” means we searched and found nothing, not that it is impossible. Compatibility changes often. Spot an error? Tell us and we will fix it.
Not that we could find. No NexBlue Matter announcement or support found when we searched.
Not that we could find. No NexBlue Alexa support found on the pages we opened or when we searched.
Not that we could find. No NexBlue Google Home support found on the pages we opened or when we searched.
Not that we could find. No NexBlue Apple Home or HomeKit support found when we searched.
Yes. Home Assistant has a built-in NexBlue integration, added in release 2026.9. It reads the NexBlue cloud once a minute and provides sensors for state, power, energy, current and voltage, plus a start and stop switch. Local control is not part of it, and Modbus TCP is configured separately in YAML. The listed owner is @nexblue-maintainer, and we could not confirm whether that is NexBlue staff.
Not that we could find. No integration found when we searched.
Yes, officially. Homey lists an official myNexBlue app. It starts and stops charging, reads power and sessions, sets the current limit and works in Flows. The listing does not say which Homey models or Homey Bridge it needs. A Homey community thread reports it was built by a development agency, cannot control the Zen load balancer, and caps the current limit at 16 A.
Not that we could find. No driver found when we searched.
Answers come from the sourced table above. See how NexBlue compares with all brands on the smart home brand statistics page.
Other brands in EV Chargers.