Satel is a Polish maker of alarm, access control and fire signalling systems, based in Gdansk. Its INTEGRA alarm panels are controlled locally with keypads and remotely with the INTEGRA CONTROL app through network or GSM modules.
Visit Satel website Back to all brands
Works with full table
Satel alarm panels connect through add-on modules. The ETHM-1 Plus gives the INTEGRA a TCP/IP connection for the INTEGRA CONTROL app and for third-party software, INT-GSM modules add a mobile data route, and INT-KNX links the panel to a KNX bus. Satel documents its integration protocol, which is why Home Assistant and openHAB can read and control the panel locally.
That suits installer-fitted security that you also want to appear in a Home Assistant, openHAB or KNX setup. It is weaker if you want a plug-and-play cloud link to Alexa or Google Home: we found no Satel page documenting either, and the voice route we did find is limited to app shortcuts.
Source: INTEGRA CONTROL product page
Remote control for INTEGRA alarm systems: arming and disarming, event log, automation device control, temperature readings, IP camera video and configurable alerts. It needs an ETHM-1 Plus, INT-GSM or INT-GSM LTE module with recent firmware, while the older ETHM-1 lacks push notifications, critical alerts and shortcuts. Published by Satel sp. z o.o., Gdansk. We could not load the Google Play page itself: the Android package name pl.satel.android.mobilekpd2 comes from a third-party listing that cites Play data.
The title of Satel's privacy policy for mobile apps lists INTEGRA CONTROL, PERFECTA CONTROL, VERSA CONTROL, GX CONTROL, ACSP CONTROL and BE WAVE. We could not open that page, so what each app does and which platforms it covers is unconfirmed.
Official supported by the brand Community built by someone else Not found searched, nothing found Unconfirmed sources conflict or could not be opened
| Platform | Status | What it means | Sources |
|---|---|---|---|
| Connection | |||
| Ethernet (TCP/IP) | Yes | The ETHM-1 and ETHM-1 Plus modules convert the INTEGRA's keypad bus to Ethernet and support the integration protocol. The INTEGRA CONTROL app and Home Assistant both connect through them. | Satel ETHM-1 and INT-RS protocol description INTEGRA CONTROL product page |
| GSM | Yes | INT-GSM and INT-GSM LTE modules are listed as supported connections for the INTEGRA CONTROL app, as an alternative to the ETHM-1 Plus. We did not check their data plans or limits. | INTEGRA CONTROL product page |
| RS-232 | Yes | The INT-RS and INT-RS Plus modules give the panel an RS-232 serial connection with the same integration protocol. | Satel ETHM-1 and INT-RS protocol description |
| KNX | Yes | INT-KNX connects an INTEGRA panel to a KNX bus. The panel can control KNX actuators through 8 to 64 virtual outputs, and bus devices can control the alarm. The module needs a separately bought bus coupling unit. | INT-KNX manual (ManualsLib) |
| Wi-Fi, Bluetooth, Zigbee, Z-Wave, Thread | Unconfirmed | None of these appeared on the Satel pages we read for the INTEGRA line. We did not search Satel's other product ranges. | Searched, no source |
| Matter | Unconfirmed | We found no Matter announcement or product from Satel on the pages we read. | Searched, no source |
| Voice assistants and ecosystems | |||
| Amazon Alexa | Unconfirmed | We found no Satel Alexa skill or page. A KNX vendor page says its own product adds Alexa control on top of Satel KNX products, which is a third-party route. | Thinka: Satel KNX |
| Google Home | Not mentioned | Satel's INTEGRA CONTROL page says the app creates home screen shortcuts that work with voice commands through Siri and Google Assistant. It does not describe a Google Home integration. | INTEGRA CONTROL product page |
| Apple Home | Not mentioned | No HomeKit support from Satel found. Siri shortcuts are mentioned for INTEGRA CONTROL, and the third-party Thinka page says it adds HomeKit control to Satel KNX products. | INTEGRA CONTROL product page Thinka: Satel KNX |
| Fibaro | Not mentioned | Fibaro's compatibility page lists Satel under Security and says Satel accessories can become part of the Fibaro Smart Home to manage alarm and security remotely. It gives no models or setup steps. | Fibaro compatibility page |
| Open platforms and developer access | |||
| Home Assistant | Yes | A built-in Satel Integra integration is maintained by the Home Assistant project, not by Satel. It supports only the INTEGRA line through an ETHM-1 Plus with firmware 2.00 or later, uses Satel's TCP protocol with local push updates, and exposes zones, outputs, partitions as alarm panels and temperature zones. Setup needs the integration option enabled in Satel's DLOADX tool. The page rates it Bronze and shows about 924 active installs. | Home Assistant Satel Integra |
| Homey | Community | A community app by ML Development, not Athom or Satel, covers outputs, partitions and zones over the LAN. It needs an ETHM-1 or ETHM-1 Plus and lists INTEGRA 24 to 256 Plus panels. The listing shows Homey Cloud, Homey Pro, Homey Pro mini and Self-Hosted Server, but says a Homey Bridge is required, and one panel says the app is not compatible with the selected Homey. | Homey Satel Integra app |
| openHAB | Yes | A Satel Integra binding is in openHAB's add-on list. It supports ETHM-1 and ETHM-1 Plus (TCP/IP) and INT-RS (serial), reads and controls partitions, zones, outputs and shutters, and supports encryption. It is maintained as part of openHAB, not by Satel. | openHAB Satel binding |
| Node-RED | Unconfirmed | We did not search for a Node-RED node specifically and found none in the other results. | Searched, no source |
| Samsung SmartThings | Unconfirmed | We found no SmartThings integration for Satel in the pages we read. | Searched, no source |
| Hubitat | Unconfirmed | We found no Hubitat driver for Satel in the pages we read. | Searched, no source |
| Domoticz | Unconfirmed | We found no Domoticz plugin for Satel in the pages we read. | Searched, no source |
| Control4 | Unconfirmed | We found no Control4 driver for Satel in the pages we read. | Searched, no source |
| IFTTT | Unconfirmed | We found no Satel service on IFTTT in the pages we read. | Searched, no source |
| Philips Hue | Not found | No integration found in the pages we read. | Searched, no source |
| Integration protocol and developer access | Official | Satel publishes a short technical description of the integration protocol for INT-RS and ETHM-1 modules (version dated 5 March 2020). It covers reading zones, partitions, outputs, troubles and event logs, controlling arming and outputs, and managing users. The copy we read is a mirror on a third-party site, so the current official download location is unconfirmed. | Satel ETHM-1 and INT-RS protocol description (mirror) |
Checked 11 November 2026 against the brand's own pages, app store listings and each project's own page. “Not found” means we searched and found nothing, not that it is impossible. Compatibility changes often. Spot an error? Tell us and we will fix it.
Unconfirmed. We found no Matter announcement or product from Satel on the pages we read.
Unconfirmed. We found no Satel Alexa skill or page. A KNX vendor page says its own product adds Alexa control on top of Satel KNX products, which is a third-party route.
Not that we could find. Satel's INTEGRA CONTROL page says the app creates home screen shortcuts that work with voice commands through Siri and Google Assistant. It does not describe a Google Home integration.
Not that we could find. No HomeKit support from Satel found. Siri shortcuts are mentioned for INTEGRA CONTROL, and the third-party Thinka page says it adds HomeKit control to Satel KNX products.
Yes. A built-in Satel Integra integration is maintained by the Home Assistant project, not by Satel. It supports only the INTEGRA line through an ETHM-1 Plus with firmware 2.00 or later, uses Satel's TCP protocol with local push updates, and exposes zones, outputs, partitions as alarm panels and temperature zones. Setup needs the integration option enabled in Satel's DLOADX tool. The page rates it Bronze and shows about 924 active installs.
Unconfirmed. We found no SmartThings integration for Satel in the pages we read.
Yes, through a community-built integration. A community app by ML Development, not Athom or Satel, covers outputs, partitions and zones over the LAN. It needs an ETHM-1 or ETHM-1 Plus and lists INTEGRA 24 to 256 Plus panels. The listing shows Homey Cloud, Homey Pro, Homey Pro mini and Self-Hosted Server, but says a Homey Bridge is required, and one panel says the app is not compatible with the selected Homey.
Unconfirmed. We found no Hubitat driver for Satel in the pages we read.
Answers come from the sourced table above. See how Satel compares with all brands on the smart home brand statistics page.